Spot assays and colony formation units
We introduced cell counting previously.
A spot assay (also called a serial dilution spotting assay) is a semi-quantitative microbiology technique used to compare cell viability, growth rates, and stress tolerance across different strains or treatments on solid agar. To perform the assay, cultures are first standardized to the exact same starting cell density, serially diluted (typically in 5-fold or 10-fold steps), and spotted in small droplets side-by-side onto agar plates containing specific nutrients, drugs, or environmental stressors. After incubating for 1 to 3 days, comparing the number of isolated colonies and the density of growth across each dilution row provides an immediate visual readout of which strains thrive, grow slowly, or die under the tested conditions.
What do we mean by “semi-quantitative? In context,
- Qualitative (Yes/No): “Did the yeast survive the drug?” → Yes, there are colonies on the plate.
- Semi-Quantitative (Rough Scale / Relative Comparison): “Roughly how much worse did the mutant survive compared to wild-type?” → The mutant stopped growing two 10-fold spots earlier, so it is roughly 100-fold more sensitive (you can easily see big 5× or 10× jumps, but you can’t reliably tell a 20% difference by eye).
- Quantitative (Exact Measurement): “How many viable cells per milliliter are in this tube?” → 2.43 × 10⁷ cells/mL (measured via a hemocytometer count or a full-plate CFU count with 30–300 separated colonies).
- For example, we routinely spot 30 μL and spread to disperse the growing colonies into unique spots — in principle, this is quantitative — it raises the countable range: we can accurately count 30 to 100 discrete colonies per spot, which lowers sampling error.
See our Serial dilution calculator at Basic stock solutions.
Standard Yeast Spot Assay Protocol
1. Grow and Standardize Starting Cultures
- Grow all yeast strains overnight in liquid media (eg, YPD or synthetic dropout media) at 30°C with shaking. Yeast strains we routinely work with include the commercial bread yeast and wine yeasts (Premiere Cuvee) from Red Star®.
Both belong to the Saccharomyces cerevisiae species, commercial bread yeast is bred for rapid carbon dioxide production to leaven dough quickly, whereas wine yeast (such as Premier Cuvée) is bred for high alcohol tolerance, sulfite resistance, clean flavor profiles, and the ability to clump together and settle to the bottom (flocculation) during long fermentations.
- (Optional for best accuracy) Dilute overnight cultures into fresh media and grow for 3–4 hours so all strains are in mid-log phase (OD₆₀₀ ≈ 0.4–0.8).
- Measure the OD₆₀₀ (or hemocytometer count) of each culture.
- Dilute every strain with sterile water or media to the exact same starting concentration in row 1 of a sterile 96-well plate (typically OD₆₀₀ = 0.5 or 1.0, which corresponds to roughly
. Prepare 200 µL per strain.
2. Perform Serial Dilutions
- Add 180 µL of sterile water (or PBS) to columns 2 through 6 of your 96-well plate for a 10-fold dilution series (use 160 µL of water + 40 µL of cells if you want finer 5-fold steps).
- Transfer 20 µL from Column 1 (undiluted standard) into Column 2 (
dilution). Pipette up and down 5–10 times to mix thoroughly. - Change pipette tips, then transfer 20 µL from Column 2 into Column 3 (
dilution). - Repeat across the row down to Column 6 (
) dilution).
Tip: Always vortex or pipette-mix immediately before transferring, as yeast settle quickly to the bottom of the wells.
3. Spot onto Agar Plates
- Ensure your agar plates are dry on the surface (if plates are wet, droplets will run together; dry them slightly open in a sterile hood for 15–20 minutes if needed).
- Mix each well gently, then pipette 3 to 5 µL from each dilution onto the agar plate in neat, evenly spaced rows (using a multichannel pipette saves time and keeps rows straight).
- Include a control plate (standard rich media, no drug/stress) alongside your experimental plates (eg, + drug, high salt, or incubated at 37°C) using the exact same dilution series.
- Leave the plate lid ajar in a sterile area for 10–15 minutes until the droplets completely soak into the agar.
- Invert the plates and incubate at 30°C (or your test temperature) for 24 to 72 hours. Check plates daily so fast-growing strains don’t overgrow before slow-growing strains appear.
How to interpret results
Always compare your strain variants and experimental plates directly against your untreated control plate and bread yeast reference strain.
- Equal Growth Across All Plates: If wine yeast and bread yeast show the exact same number of spots on both the control and stress plates, the strain variant/treatment has no effect on survival or growth rate.
- Even Loading Check (Control Plate): On the untreated control plate, every strain should grow out to the exact same dilution spot (eg, visible colonies down to the
spot). If wine yeast stops one spot earlier on the control plate, your starting OD₆₀₀ standardization was off, and you must account for that baseline difference. - Reduced Viability (Cell Death): On the stress plate, wine yeast stops growing 1 or 2 spots earlier than bread yeast (eg, wine yeast grows at
, while wine yeast stops at
, but the colonies that do appear are normal-sized. This means 90%–99% of wine yeast cells died, while the few survivors grew normally. - Slow Growth / Fitness Defect: Wine yeast produces colonies down to the same dilution spot as bread yeast
, but the colonies are noticeably smaller (pinpoint colonies). The cells are alive, but they are dividing much more slowly. - Suppressor / Spontaneous Resistant Mutants: Bread yeast shows no lawn at
or
, except for 1 or 2 large, isolated colonies. These are rare spontaneous mutants that acquired resistance to the stress.
Calculations to perform
A Colony-Forming Unit (CFU) is a measure of viable microbial cells, representing a single living cell, or a small clump of cells, that divides on solid agar to form one visible colony. Because clumped or budding cells grow into a single combined colony, CFUs estimate the number of colony-producing units in a sample rather than the exact number of individual cells.
While spot assays are primarily visual, you can extract useful quantitative data from the highest dilutions where single, separate colonies appear:
1. Viable Cell Concentration ![]()
Count the individual colonies in the dilution spot that contains roughly 5 to 30 distinct colonies, then calculate the colony-forming units per milliliter
of your starting standardized suspension:
![]()
• Example: You spot 4 µL of each dilution. At the
spot, you count 12 colonies.
![]()
2. Percent Survival (Relative Viability)
Compare how well a single strain survives a stress condition relative to its own growth on the untreated control plate:
![]()
Example: Wild-type yeast yields
on the control plate and
on a plate containing a DNA-damaging drug:
![]()
3. Fold Sensitivity (Comparing wine yeast variant vs. bread yeast)
When single colonies are too crowded to count, you can still express sensitivity as a fold difference based on the last dilution spot showing visible growth:
![]()
Example: Using 10-fold dilutions, bread yeast grows down to the
spot (spot #5), while your mutant stops at the
spot (spot #3). The mutant is
![]()
to that condition than bread yeast.
References, suggested readings
Doménech-Carbó MT, Doménech-Carbó A. (2022) Spot tests: past and present. ChemTexts 8(1):4.
Wikipedia: Miles and Misra method.